Skip to content
EN
  • Español
  • English
Advertisement

Engine displacement, mean piston speed and mean effective pressure

Work out engine displacement from bore, stroke and cylinders, or the missing stroke, plus mean piston speed, brake mean effective pressure and torque.

Fill in 3 of the 4 fields and the missing one is calculated. You can type in any of them.

—
—
Displacement per cylinder—
Mean piston speed—
Brake mean effective pressure—
Torque—
Power per litre—
Combustion chamber volume—
Stroke / bore (1 = square, less = oversquare)—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/engine-displacement-calculator/

Advertisement

Engine displacement is the volume swept by the pistons from top dead centre to bottom dead centre, adding all cylinders. It follows directly from bore, stroke and number of cylinders, and with power and speed you can compare engines: piston speed, brake mean effective pressure, torque and power per litre.

Displacement formula

V = z · π · D² / 4 · s

D is the bore, s the stroke and z the number of cylinders. Example: 4 cylinders of 81 × 77.4 mm: 4 · π · 8.1² / 4 · 7.74 = 1595 cm³, 399 cm³ each. A «square» engine has s = D; with s < D it is oversquare (revs higher) and with s > D it is long-stroke (more low-end torque).

Mean piston speed

cm = 2 · s · n / 60

On each revolution the piston goes up and down once. With 77.4 mm at 5800 rpm, cm = 15 m/s. Car engines run between 12 and 20 m/s and racing engines reach 25: the stroke limits the revs an engine can take.

Advertisement

Mean effective pressure and torque

BMEP = P · 60 · k / (V · n)  ·  M = P / (2π · n / 60)

k = 2 for four-stroke (one firing every two revolutions) and 1 for two-stroke. Mean effective pressure is the constant pressure that would give the same power; it does not depend on size, so it is useful for comparing. With 77 kW at 5800 rpm and 1595 cm³: 10 bar and 127 N·m.

EngineBMEP at full loadPower per litre
Naturally aspirated petrol9 to 13 bar45 to 80 kW/L
Turbo petrol15 to 25 bar70 to 130 kW/L
Car turbo diesel18 to 27 bar50 to 75 kW/L
Slow industrial diesel15 to 25 bar15 to 35 kW/L

Combustion chamber and compression ratio

ε = (Vu + Vc) / Vc  →  Vc = Vu / (ε − 1)

Compression ratio compares the volume with the piston down and up. With 399 cm³ per cylinder and ε = 10.5, the chamber is 42 cm³. Petrol engines run 9.5 to 13 and diesels 15 to 20.

Several ways to get each value

  • Displacement: from bore, stroke and cylinders.
  • Stroke or bore: from displacement and the other one (s = 4V / (z π D²)).
  • Torque from power: M (N·m) = 9549 · P (kW) / n (rpm).
  • Displacement in litres from cubic inches: 1 in³ = 16.387 cm³.
Advertisement

Frequently asked questions

How is engine displacement calculated?

V = z · π · D² / 4 · s. A 4-cylinder engine with 81 mm bore and 77.4 mm stroke: 4 · π · 8.1² / 4 · 7.74 = 1595 cm³ (a 1.6).

What is mean piston speed?

The distance the piston travels per second: cm = 2 · s · n / 60. With 77.4 mm at 5800 rpm, 15 m/s. Road engines run 12 to 20 m/s; beyond that rings and rods suffer a lot.

What is mean effective pressure?

The constant pressure that, pushing the piston on every power stroke, would give the same power: BMEP = P · 60 · k / (V · n), with k = 2 for four-stroke and 1 for two-stroke. Useful to compare engines of different size: a naturally aspirated petrol gives 9 to 13 bar and a turbo over 20.

How is combustion chamber volume found?

From the compression ratio: Vc = Vu / (ε − 1). For 399 cm³ per cylinder and ε = 10.5: 42 cm³.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.