Pneumatics and hydraulics
Cylinders, air consumption, flow rates and pressure losses.

Pipe insulation calculator: heat loss and savings
Calculate the heat loss of a pipe with and without insulation, its surface temperature, the energy lost per year and the insulation thickness for a given loss.

Water heating calculator (flow rate, power and steam)
Calculate the power needed to heat a water flow from one temperature to another, the flow a given power can heat or the outlet temperature, and the steam needed.

Open channel and partially full pipe calculator (Manning)
Calculate the flow rate of a rectangular or trapezoidal channel or a partially full pipe with the Manning equation. Also the water depth, slope or roughness.

Steam consumption calculator (kg/h to kW)
Calculate the heat output of a saturated steam flow as it condenses (kg/h to kW) or the steam used by equipment of a given power, with the steam volume at its pressure.

Pneumatic cylinder force calculator
Work out the extend (push) force of a pneumatic cylinder from the air pressure, the piston diameter and the efficiency, or the bore you need.

Restriction orifice calculator
Calculate the bore of a restriction orifice (pressure-reducing plate) for a pressure drop and flow rate, the drop an orifice causes or the flow it lets through.

Pipe pressure drop calculator with fittings
Calculate the pressure drop in a pipe with its elbows, tees and valves (Darcy-Weisbach and Colebrook). Also the flow rate, diameter or maximum length.

Orifice plate flow meter calculator
Calculate the flow rate measured by an orifice plate from the differential pressure, the differential pressure for a flow rate or the bore, with the permanent loss (ISO 5167).

Pump power calculator
Pump power calculator: electrical power from flow rate, pressure and efficiencies, the flow rate for a given power and the energy per m³ pumped.

Hydrostatic pressure and tank level calculator
Work out the pressure of a liquid column (from meters of water to bar) or the fill level of a tank from the pressure read by a transmitter.

Pipe velocity, flow rate and diameter calculator
Calculate the fluid velocity in a pipe from the flow rate and diameter, the flow rate at a given velocity or the diameter needed for a flow rate.

Tank volume and fill time calculator
Calculate the volume of a tank or pipe and how long it takes to fill or empty at a flow rate. Also the flow rate needed to fill it in a given time or the level it reaches.

Kv and Cv flow coefficient calculator for valves
Calculate the Kv or Cv of a valve from the flow rate and pressures, or the flow rate or pressure for a known Kv. Suggests a globe valve and its opening.

Economic pipe diameter calculator
Calculate the economic diameter of a steel pipe from the flow rate and fluid density (Peters and Timmerhaus), or the flow rate for which a diameter is optimal.

Water hammer calculator
Calculate the water hammer surge pressure when a valve closes (Joukowsky and Michaud), the pressure wave speed and the minimum closing time to stay below a pressure.

Pump NPSH available calculator
Calculate the NPSH available at a pump suction to know whether it will cavitate, the maximum suction lift or the suction losses it can take, with water at any temperature.

Reynolds number calculator: laminar or turbulent flow
Calculate the Reynolds number of a fluid in a pipe and whether the flow is laminar, transitional or turbulent. Also the velocity, flow or diameter.

Normal to actual gas flow converter (Nm³/h to m³/h)
Convert a gas flow rate from Nm³/h (normal conditions) to actual m³/h at its pressure and temperature, and back. For compressed air, natural gas or nitrogen.
