Pool calculator: litres, salt and chlorine
Work out the litres of a rectangular, round or oval pool or pond with a sloping bottom, and the salt, chlorine, pump flow and filling time it needs.
You need the litres of a pool for almost everything: adding salt and chlorine, choosing the pump, knowing how long it takes to fill and what the water costs. The calculator gives the volume of a rectangular, round or oval pool or pond, with a flat or sloping bottom, and what it needs.
Volume formulas
hm = (h₁ + h₂) / 2 is the average depth when the bottom slopes from one end to the other. It is measured to the water level (about 100 to 150 mm below the edge). Example: 8 × 4 m with 1.1 and 1.8 m: 8 · 4 · 1.45 = 46.4 m³ = 46,400 litres. If the bottom has a flat part and a deep end, work out each part and add them.
Salt, chlorine and pump
- Salt: kg = m³ · g/L. Salt chlorinators usually ask for 3 to 5 g/L. Spread it with the pump running.
- Chlorine: raising 1 mg/L in 1 m³ takes 1 g of available chlorine: 1.54 g of 65 % calcium hypochlorite or 6.7 mL of 150 g/L bleach. Pool rules usually ask for 0.5 to 2 mg/L of free chlorine and a pH of 7.2 to 8.0.
- Pump: it has to turn over all the water in 4 to 6 hours. With 46.4 m³, about 11.6 m³/h for 4 h.
- Filling: a garden hose gives 12 to 20 L/min; at 15 L/min, 46,400 L take 51.5 hours. For more detail use the filling time calculator.
Several ways to get each value
- The litres from the dimensions.
- The length of a pool of a given volume: enter the volume and clear the length.
- From the water meter: note the reading before and after filling; the difference in m³ is the real volume.
- Irregular ponds and tanks: split the shape into simple parts and add their volumes.
Tips
- Add chlorine in the evening: the sun uses it up fast.
- Adjust the pH before the chlorine: with a high pH chlorine works much worse.
- Evaporation takes 3 to 7 mm a day in summer; work it out with the water evaporation calculator.
Frequently asked questions
How do you work out the litres in a pool?
Length times width times average depth, times 1000. An 8 × 4 m pool with 1.1 m at the shallow end and 1.8 at the deep end: 8 · 4 · 1.45 = 46.4 m³ = 46,400 litres.
How many litres in a round pool?
π · D² / 4 · depth. A 4.5 m diameter pool with 1.2 m of water: 3.1416 · 20.25 / 4 · 1.2 = 19.1 m³ (19,100 L).
How much salt do I add to the pool?
Litres times the g/L the chlorinator asks for. For 46,400 L at 4 g/L, 186 kg (more than seven 25 kg bags). If it already has salt, only the difference.
How much chlorine do I add?
Raising 1 mg/L in 1 m³ takes 1 g of available chlorine, which is 1.5 g of 65 % calcium hypochlorite or 6.7 mL of 150 g/L bleach. For 46.4 m³ and 2 mg/L: 143 g of granules.
