Skip to content
EN
  • Español
  • English
Advertisement

Asphalt calculator: tonnes per m² and thickness

Work out the tonnes of asphalt for a street, a driveway or a car park from the area and the thickness, or the square metres one truckload covers.

Fill in 2 of the 3 fields and the missing one is calculated. You can type in any of them.

Surface course 3 to 6 cm; binder course 5 to 10 cm; base 7 to 15 cm.
%
Advanced options (1)

They come with a typical value: change it only if you know it.

Compacted volume—
Rate (kg per m²)—
25 t trucks—
Area covered by a 25 t truck—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/asphalt-calculator/

Advertisement

Asphalt (hot mix asphalt) is bought by the tonne and laid by the square metre at a given thickness. To order it you convert one into the other with its compacted density. The calculator gives the tonnes for an area, the square metres you can cover with what you have, or the thickness you end up with.

Formula

M = A · e · ρ · (1 + waste)

A is the area, e the compacted thickness and ρ the compacted density of the mix (EN 13108). Waste covers extra thickness at joints and edges and what is left in the paver: 3 to 8 %. Example: 100 m² with 5 cm of AC at 2.4 t/m³ is 12 t, and with 5 % waste, 12.6 t.

Density and thickness of each mix

MixDensity (t/m³)Usual thicknessUse
AC 16 surf (dense)2.35 to 2.454 to 6 cmSurface course of streets and roads
AC 22 bin / AC 32 base2.35 to 2.405 to 15 cmBinder and base courses
BBTM (thin layer)2.25 to 2.352 to 3 cmThin non-skid surface
PA (porous)1.95 to 2.054 to 5 cmMotorways in rainy areas, lower noise
SMA2.40 to 2.503 to 5 cmHeavy traffic
Cold mix2.1 to 2.33 to 5 cmPothole repair
Advertisement

Several ways to get each value

  • The tonnes, from the area and thickness: what you order from the plant.
  • The area covered by what you have: enter the tonnes and clear the area. A 25 t truck at 5 cm covers about 200 m².
  • The actual thickness laid: with the tonnes used and the m² done, clear the thickness. Handy to check a job.
  • The density of a mix, if you know what was used on a measured area and thickness.
  • Rule of thumb: 1 cm of AC per m² weighs about 24 kg.

Tips

  • It is laid on a clean, dry base with a prime coat (on gravel) or a tack coat (on another layer).
  • Loose it takes up 20 to 25 % more: the paver leaves it thicker and the roller brings it down to the design thickness.
  • Laying temperature is around 150 °C; below about 120 °C it no longer compacts well.
  • For the gravel base use the aggregates calculator.
Advertisement

Frequently asked questions

How many tonnes of asphalt per m²?

Thickness times density: 5 cm of AC at 2.4 t/m³ is 0.05 · 2400 = 120 kg/m². For 100 m², 12 t, plus 5 % waste: 12.6 t.

What is the density of asphalt?

Compacted, 2.3 to 2.45 t/m³ for dense mixes, about 2.0 t/m³ for porous asphalt and 2.2 t/m³ for cold mix. Loose in the truck it weighs the same but takes up 20 to 25 % more.

How many m² does a truck of asphalt cover?

A 25 t truck with 5 cm of AC covers 25 000 / 120 = 208 m², slightly less with waste. With 4 cm, about 260 m².

How thick should asphalt be on a street?

The surface course is 3 to 6 cm. Below it, depending on traffic, a 5 to 10 cm binder course and an asphalt or granular base. For a path or a driveway 4 to 5 cm over well-compacted gravel is enough.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.