Compressible flow: nozzles, normal shock and Prandtl-Meyer
Work out the isentropic relations of a gas (T/T₀, p/p₀, ρ/ρ₀ and A/A*) from the Mach number or the nozzle area ratio, the normal shock wave and the Prandtl-Meyer angle.
When a gas moves fast (above Mach 0.3), its density changes with speed and liquid formulas no longer apply. In a converging-diverging (de Laval) nozzle, the gas accelerates to Mach 1 at the throat and, if the exit pressure is low enough, keeps accelerating supersonically in the diverging part. This happens in steam turbine nozzles, rockets, safety valves and ejectors.
Isentropic relations
Subscript 0 is stagnation (gas at rest, in the reservoir) and A* the throat area, where M = 1. Example with air (γ = 1.4) at Mach 2: T/T₀ = 0.556, p/p₀ = 0.128 and A/A* = 1.6875. For the same area ratio there is a subsonic solution (M = 0.37) and a supersonic one (M = 2); choose the branch in the calculator.
Normal shock wave
If the exit pressure is not the design one, a shock wave appears inside the nozzle: the flow jumps from supersonic to subsonic, with a jump in pressure, temperature and density, and stagnation pressure is lost. At Mach 2: M₂ = 0.577, p₂/p₁ = 4.5, T₂/T₁ = 1.69 and p₀₂/p₀₁ = 0.721.
Prandtl-Meyer expansion
A supersonic flow turning around a convex corner expands and accelerates without losses through a fan of waves. The turning angle is the difference in ν between exit and inlet: at Mach 2, ν = 26.4°; turning 10° more, ν = 36.4° and it leaves at Mach 2.385. The Mach angle, μ = arcsin (1/M), is the angle of the waves the flow leaves.
Several ways to get each value
- The relations: from the Mach number.
- The exit Mach of a nozzle: from the ratio of exit to throat area, on the supersonic branch.
- The exit area for a Mach number: A = A* · (A/A*).
- The design exit pressure: p = p₀ · (p/p₀). If the outside pressure is higher, a shock appears.
Frequently asked questions
What area ratio is needed for Mach 2?
With air (γ = 1.4), A/A* = 1.6875: the nozzle exit must be 1.69 times the throat. Pressure there is 12.8 % of stagnation and temperature 55.6 %.
Why are there two solutions for the same area ratio?
A/A* falls to 1 at the throat (M = 1) and rises again. With A/A* = 1.6875 you can have M = 0.37 (if the gas does not accelerate past the throat) or M = 2 (correctly expanded nozzle). The exit pressure decides.
What happens in a normal shock wave?
The flow jumps from supersonic to subsonic: at Mach 2, M₂ = 0.577, pressure is multiplied by 4.5 and 28 % of stagnation pressure is lost. It is irreversible: energy is conserved, entropy rises.
What is the Prandtl-Meyer function for?
It gives how much a supersonic flow turns when expanding around a corner: ν(M₂) − ν(M₁) = turning angle. At Mach 2, ν = 26.4°; turning 10° more it accelerates to ν = 36.4°, about Mach 2.38.
