Hardness conversion: Brinell, Vickers, Rockwell and tensile strength
Convert steel hardness between Vickers (HV), Brinell (HBW), Rockwell C and B and tensile strength, or work out Vickers or Brinell hardness from the load and the indentation.
Hardness tells how much a material resists being dented. It is measured by pressing an indenter (a ball or a diamond point) with a load and measuring the mark. Each method gives a number in its own scale, and in the workshop you have to convert: the drawing asks for HRC and the tester gives HV, or the supplier gives HB. The calculator converts between Vickers, Brinell, Rockwell C and B and the tensile strength of steels, and works out HV or HBW from the indentation.
Test formulas
F in newtons; d the mean diagonal of the indentation (Vickers) or its diameter (Brinell) and D the ball diameter, in mm. Rockwell has no indentation formula: the tester measures depth and reads the number directly. Example: HV30 (294.2 N) with a 0.428 mm diagonal: 304 HV. Brinell 10/3000 with a 3.5 mm indentation: 302 HBW.
Converting between scales
There is no exact formula between scales: each test deforms the material differently. Conversions come from measured tables, like the one in ISO 18265 (annex A, unalloyed and low-alloy steels), which the calculator uses, interpolating between its values.
| HV | HBW | HRC | HRB | Rm (MPa) |
|---|---|---|---|---|
| 150 | 143 | — | 78.7 | 480 |
| 200 | 190 | — | 91.5 | 640 |
| 250 | 238 | 22.2 | 99.5 | 800 |
| 300 | 285 | 29.8 | — | 965 |
| 400 | 380 | 40.8 | — | 1,290 |
| 500 | 475 | 49.1 | — | 1,595 |
| 600 | 570 | 55.2 | — | 1,955 |
| 700 | — | 60.1 | — | — |
| 800 | — | 64.0 | — | — |
For other materials (austenitic stainless steels, aluminium, brass) the equivalences differ: this table does not apply to them.
Several ways to get each value
- Convert: enter the value in any scale and the others appear.
- From the indentation: choose Vickers or Brinell, enter the load and the indentation size.
- The approximate strength of a steel without a tensile test: from its hardness.
- Rule of thumb: HB ≈ 0.95 · HV; Rm (MPa) ≈ 3.2 · HV ≈ 3.4 · HB.
Which one to use
- Brinell (10 mm ball, 3000 kgf): cast iron and soft or coarse-grained steels; the large indentation averages out.
- Vickers (diamond pyramid): all kinds of materials and thin layers; it is the reference scale.
- Rockwell: quick and without a microscope, the usual one in the workshop; C for hardened steel and B for soft.
Frequently asked questions
How many HRC is 300 HV?
According to the ISO 18265 table for steels, 300 HV is 29.8 HRC, 285 HBW and about 965 MPa tensile strength.
How is Vickers hardness calculated?
HV = 0.1891 · F / d², with F in N and d the mean of the two indentation diagonals in mm. With HV30 (294.2 N) and 0.428 mm: 0.1891 · 294.2 / 0.183 = 304 HV.
Can tensile strength be estimated from hardness?
Roughly, for steels: Rm ≈ 3.2 · HV (or 3.4 · HB). Good for estimating, not certifying: the standard says conversions are only valid for the material in the table.
When is HRC used and when HRB?
Rockwell C (diamond cone, 150 kgf) for hardened steels, from about 20 to 68 HRC. Rockwell B (ball, 100 kgf) for soft steels, brass and aluminium, up to about 100 HRB.
