Rebar calculator: number of bars and weight of steel
Work out how many reinforcing bars a slab, footing or wall needs, the metres, the 12 m bars and the kilos of steel from the bar diameter and spacing.
The reinforcement of a slab, footing or wall is a mesh of ribbed steel bars at a fixed spacing. To order or price it you have to count the bars, add up the metres and turn them into kilos, which is how it is sold. The calculator does it with the nominal bar weight and also backwards: with the kilos you have, what spacing they reach or what area they cover.
Formulas
L and W are the bar lengths in each direction (the slab less the cover), s the spacing and d the diameter. Steel is taken as 7850 kg/m³, the density EN 10080 uses for the nominal bar weight.
Rebar weights
| Diameter | kg/m | 12 m bar |
|---|---|---|
| Ø6 | 0.222 | 2.66 kg |
| Ø8 | 0.395 | 4.74 kg |
| Ø10 | 0.617 | 7.40 kg |
| Ø12 | 0.888 | 10.65 kg |
| Ø16 | 1.578 | 18.94 kg |
| Ø20 | 2.466 | 29.59 kg |
| Ø25 | 3.853 | 46.24 kg |
| Ø32 | 6.313 | 75.76 kg |
Worked examples
- 6 × 4 m slab with Ø12 at 20 cm both ways: 21 bars of 6 m + 31 of 4 m = 250 m; with 10 %, 275 m · 0.888 = 244 kg, 23 bars of 12 m.
- 10 m strip footing, 0.8 m wide, Ø16 at 15 cm across only: 10 / 0.15 + 1 = 67.7 bars of 0.8 m = 54.1 m; with 10 %, 94 kg.
- What spacing do 400 kg of Ø10 reach in an 8 × 5 m slab with two meshes? About 28 cm.
Several ways to work it out
- By bars: count the bars in each direction (width over spacing, plus one) and multiply by their length. This is what the calculator does.
- By steel ratio: in a two-way mesh, kg/m² is 2 · weight per metre / s. Ø12 at 20 cm gives 2 · 0.888 / 0.2 = 8.9 kg/m², plus laps.
- By concrete volume: at early design stage 40 to 120 kg of steel per m³ of concrete are used depending on the element; good for a budget, not for ordering.
- Welded mesh: if the reinforcement is a factory mesh (for example 15 × 15 Ø6), the area is enough, adding a two-square lap between sheets.
The slab concrete comes from the concrete calculator and the weight of any other bar, tube or plate from metal weight.
Frequently asked questions
How much does a metre of rebar weigh?
Weight = 0.006165 · d², with d in mm: Ø6 weighs 0.222 kg/m; Ø8, 0.395; Ø10, 0.617; Ø12, 0.888; Ø16, 1.578; Ø20, 2.466; Ø25, 3.853 and Ø32, 6.313 kg/m.
How much rebar does a 6 × 4 m slab need with Ø12 at 20 cm?
One mesh: 21 bars of 6 m and 31 of 4 m, 250 m; with 10 % for laps, 275 m and 244 kg, about 10.2 kg/m². With two meshes, double.
How many bars fit across a width?
The width divided by the spacing, plus one: across 4 m at 20 cm, 4 / 0.2 + 1 = 21 bars.
What is B500S steel?
Weldable ribbed reinforcing steel with a 500 MPa yield strength, the usual grade on European sites. B500SD is the high-ductility version for seismic zones.
