Stair calculator: steps, tread and riser
Work out the number of steps of a staircase, tread, riser, landings and the length it takes, with the 2R + T stride rule and Spanish code limits.
Work out a straight staircase: how many steps it needs, the height of each one (riser), its depth (tread or going) and the length it takes on plan. Enter the floor-to-floor height and two of the other three values.
Formulas
H is the total rise, n the number of risers (steps), C the riser, T the tread and L the length on plan. There is one tread fewer than risers because the last step is the upper floor.
Sizes in the Spanish code CTE DB SUA 1
| Stair | Tread | Riser |
|---|---|---|
| General use | ≥ 28 cm | 13 to 18.5 cm |
| Restricted use (dwellings, one person at a time) | ≥ 22 cm | ≤ 20 cm |
For general use, also 54 ≤ 2C + T ≤ 70 cm, all treads and risers in a flight equal, at least 3 steps per flight and 3.20 m rise at most. Other countries have their own limits: always check the code that applies to you.
Landings: maximum rise of a flight
The Spanish code CTE DB SUA 1 (section 4.2.2) limits the rise of each flight to 3.20 m, and to 2.25 m in public areas or where there is no lift as an alternative. If the total rise is higher, the staircase is split into flights with a landing between them, at least as wide as the stair and 1 m long on straight flights (4.2.3). Each flight has at least 3 steps.
The last step of each flight has no tread: it is the landing (M) or the upper floor. Many designers place the landing at about 3 m for a less tiring stair: type the maximum rise you want.
How to choose the number of steps
- Divide the total rise by 17.5 cm and round: that is the most comfortable riser.
- Work out the real riser: C = H / n.
- Pick the tread so that 2C + T is close to 63 cm (an average stride).
- Check that the length L = (n − 1) · T fits in the space.
Worked example
A 2.80 m rise: 2.80 / 0.175 = 16 steps of 17.5 cm. With a 28 cm tread the stride is 2 · 17.5 + 28 = 63 cm and the stair takes 15 · 0.28 = 4.20 m on plan, at a 32° pitch. With only 3.50 m of space the tread would be 3.50 / 15 = 23.3 cm: only fit for restricted use.
Frequently asked questions
How do I work out how many steps a staircase needs?
Divide the total rise by a comfortable riser (17 to 18 cm) and round. For 2.80 m: 2.80 / 0.175 = 16 steps of 17.5 cm.
What is the 2R + T rule?
The stride rule: two risers plus one tread should add up to 54 to 70 cm, a normal stride. With a 17.5 cm riser the ideal tread is about 28 cm.
What sizes does the Spanish code require?
For general use (CTE DB SUA 1): tread of at least 28 cm and riser of 13 to 18.5 cm, with 54 ≤ 2R + T ≤ 70 cm. Restricted-use stairs allow up to 20 cm risers and 22 cm treads.
When is a landing needed?
The Spanish code (CTE DB SUA 1, 4.2.2) limits each flight to a rise of 3.20 m, and 2.25 m in public areas or without a lift as an alternative. Higher stairs are split into flights with a landing at least 1 m long between them.
Why is the length (n − 1) treads?
Because the last step is the upper floor itself: 16 risers means 15 treads in the flight.
