Skip to content
EN
  • Español
  • English
Advertisement

Thermodynamic processes: isothermal, adiabatic, isobaric and isochoric

Work out the final state of a gas in an isothermal, adiabatic, isobaric, isochoric or polytropic process, with the work, heat, internal energy and the p-V diagram.

Fill in the values you have and the rest are calculated. You can type in any of them.

Air, N₂ and O₂, 1.4; CO₂, 1.29; steam, 1.3; helium and argon, 1.67.
—
Work done by the gas (negative: done on it)—
Heat received (negative: given off)—
Internal energy change ΔU—
Enthalpy change ΔH—
Entropy change ΔS—
Amount of gas—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/thermodynamic-process-calculator/

Advertisement

A gas in a cylinder can go from one state (p₁, V₁, T₁) to another in many ways. The four always studied, plus the polytropic one that brings them together, are used to work out compressors, engines, pneumatics, gas bottles and refrigeration cycles. In all of them the gas follows the ideal gas law, p · V = n · R · T, and the first law:

Q = ΔU + W

Q is the heat the gas receives, ΔU the rise in its internal energy and W the work it does when expanding (negative if it is compressed). In an ideal gas, ΔU = n · cv · ΔT = (p₂V₂ − p₁V₁) / (γ − 1), with γ = cp / cv.

The five processes

ProcessConstantWork WHeat Q
Isobaricpp (V₂ − V₁)n cp ΔT
IsothermalT (p V = const)p₁V₁ ln(V₂/V₁)= W
IsochoricV0n cv ΔT
Adiabaticp V^γ = const(p₁V₁ − p₂V₂)/(γ − 1)0
Polytropicp Vᵏ = const(p₁V₁ − p₂V₂)/(k − 1)ΔU + W

Example: adiabatic compression of air

1 L of air at 1 bar and 20 °C is compressed suddenly (no time to give off heat) to 0.5 L. With γ = 1.4: p₂ = 1 · 2^1.4 = 2.64 bar and T₂ = 293.15 · 2^0.4 = 386.8 K (113.7 °C). The work is (100,000 · 0.001 − 263,902 · 0.0005) / 0.4 = −79.9 J: you have to put in 79.9 J, which stay as internal energy and heat the gas. Compressed slowly at 20 °C (isothermal), it reaches 2 bar and takes only 69.3 J, which leave as heat. That is why multi-stage compressors cool the air between stages.

Advertisement

The p-V diagram

Work is the area under the process curve in the pressure-volume diagram. The isotherm (p V = const) is a hyperbola; the adiabatic falls faster because the gas also cools as it expands; the isobaric is horizontal and the isochoric vertical (no area, no work). The calculator draws the curve with the area shaded.

Entropy

ΔS = n · cv · ln(T₂/T₁) + n · R · ln(V₂/V₁)

In the reversible adiabatic ΔS = 0 (that is why it is also called isentropic). If it comes out negative, the gas has given off heat to the surroundings; the entropy of the whole does not fall.

How to use the calculator

Choose the process, type the initial state (absolute pressure, volume and temperature) and one of the final values: volume, pressure or temperature. Typing in one clears the other two and calculates them. In the isochoric process the final volume is the initial one.

Advertisement

Frequently asked questions

How is an adiabatic compression calculated?

With p · V^γ = constant: p₂ = p₁ (V₁/V₂)^γ and T₂ = T₁ (V₁/V₂)^(γ−1). Air at 1 bar and 20 °C compressed to half its volume: 2.64 bar and 113.7 °C. The work is (p₁V₁ − p₂V₂)/(γ − 1).

What is the work in an isothermal process?

W = p₁ V₁ · ln(V₂/V₁). All the work leaves as heat (Q = W) because the internal energy of an ideal gas depends only on temperature. Compressing 1 L of air at 1 bar to 0.5 L takes 69.3 J.

Why is there no work in an isochoric process?

Because work is pressure times the change in volume (the area under the curve in the p-V diagram), and the volume does not change. All the heat goes into internal energy: Q = ΔU.

What is a polytropic process?

One that follows p · Vᵏ = constant with any exponent k. It covers the others: k = 0 isobaric, k = 1 isothermal, k = γ adiabatic. Real compressions, with some cooling, usually have k between 1.2 and 1.35.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.