Bernoulli equation calculator: pressure, velocity and height
Apply the Bernoulli equation between two points of a pipe: the missing pressure, flow rate, diameter or height, with velocities and heads, in any unit.
Apply the Bernoulli equation between two points of a pipe that changes diameter and height. With the flow rate, the diameters, the heights and one of the pressures, it finds the other; you can also leave the flow rate, a diameter or a height empty and that one is calculated.
The equation
Each term is a form of energy per unit volume: pressure, the energy of the velocity and that of the height. Without losses (hf = 0) the sum does not change from one point to the other. The velocities come from the flow rate with the continuity equation:
Divided by ρ · g, the equation reads in metres: p/ρg is the pressure head (how high the liquid would rise in an open tube), v²/2g the velocity head and z the elevation. Their sum is the total head, the dashed line in the drawing.
Worked example
Water at 20 °C (ρ = 998.2 kg/m³), 20 m³/h through an 80 mm pipe that narrows to 40 mm and rises 3 m. At point 1 there are 3 bar.
- Velocities: v₁ = 4 · 0.005556 / (π · 0.08²) = 1.105 m/s and v₂ = 4.421 m/s (four times more: half the diameter is a quarter of the area).
- Velocity takes ½ · 998.2 · (4.421² − 1.105²) = 9,145 Pa = 0.091 bar.
- Height takes 998.2 · 9.807 · 3 = 29,368 Pa = 0.294 bar.
- p₂ = 3 − 0.091 − 0.294 = 2.615 bar.
Where it is used
- Venturis and orifice plates: the pressure drop at the throat measures the flow.
- Pressure on upper floors of a building or at the end of a network with changes of diameter.
- Cavitation risk: if p₂ falls below the vapour pressure of the liquid, bubbles form that damage valves and pumps.
- Draining tanks: the outflow speed through an orifice is v = √(2 · g · h) (Torricelli).
Limits
The equation holds for liquids (constant density) flowing without friction in steady state. In a real pipe add the head loss hf between the two points: work it out with the head loss calculator and type it in its field. For gases with large pressure changes (over 10 %) the density changes and another formulation is needed.
Frequently asked questions
What does the Bernoulli equation say?
That in a liquid flowing without losses the sum of pressure, velocity energy and height energy is the same at every point: p + ½ρv² + ρgz = constant.
Why does pressure drop at a narrowing?
Because the same flow goes through a smaller area and must move faster. The energy it gains in velocity it loses in pressure: that is the Venturi effect.
What about friction losses?
Bernoulli is the ideal equation. In a real pipe add the head loss hf between the two points; you can work it out with the head loss calculator and type it here.
Gauge or absolute pressure?
Either, as long as you use the same at both points: the equation works with the difference. If p₂ comes out negative in gauge, there is vacuum, and below the vapour pressure the liquid boils (cavitation).
