Skip to content
EN
  • Español
  • English
Advertisement

Kv and Cv flow coefficient calculator for valves

Calculate the Kv or Cv of a valve from the flow rate and pressures, or the flow rate or pressure for a known Kv. Suggests a globe valve and its opening.

Fill in 3 of the 4 fields and the missing one is calculated. You can type in any of them.

Filled in when you choose the liquid. If you type another value, the liquid changes to “Other”.
Both gauge pressures (or both absolute).
Choose yours to see how far it opens, or let the calculator suggest one.
Pressure drop across the valve (Δp)—
Coefficient in the other unit—
Specific gravity (ρ/ρ₀)—
Valve nominal size (DN)—
Valve Kvs (fully open)—
Valve opening (linear)—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/kv-cv-flow-coefficient-calculator/

Advertisement

The flow coefficient (Kv in Europe, Cv in the United States) tells you how much liquid a valve lets through for a given pressure drop. It is the figure used to choose a control valve: with this calculator you get it from the flow rate and the inlet and outlet pressures or, the other way round, the flow rate or pressure given by a valve of known Kv. It also suggests a standard globe valve (DN and Kvs) and tells you how far it would have to open.

How to use the calculator

  1. Choose the liquid: its density is filled in. If it is not listed, choose “Other” and type the density.
  2. Of these four values, type three: flow rate, inlet pressure, outlet pressure or flow coefficient. The one you leave empty is calculated.
  3. The coefficient can be entered or read in Kv, Cv or UK Cv: change the unit in its drop-down. Below it you always have the value in the other unit.
  4. In the drawing, the valve plug moves up or down with the opening, the liquid flows faster with more flow and the gauges show both pressures.

Kv formula

Kv = Q · √( (ρ / ρ₀) / Δp )

Where Q is the flow rate in m³/h, Δp = p₁ − p₂ the pressure drop across the valve in bar, ρ the density of the liquid and ρ₀ = 1000 kg/m³ that of water. For water, ρ/ρ₀ ≈ 1 and it becomes Kv = Q / √Δp. Solving for the other values:

Q = Kv · √( Δp / (ρ / ρ₀) ) · · · Δp = (ρ / ρ₀) · (Q / Kv)²

The inlet and outlet pressures can be gauge or absolute, but both of the same kind: only their difference counts.

Advertisement

Kv and Cv: equivalences

Kv is the flow rate of water in m³/h with a 1 bar pressure drop. Cv is the flow rate of water in US gallons per minute with a 1 psi pressure drop.

Kv = 0.865 · Cv · · · Cv = 1.156 · Kv
KvCv (US)Cv (UK)
11.1560.963
44.623.85
1011.569.63
4046.238.5
100115.696.3

Worked example

10 m³/h of water (density 998 kg/m³) flow through a valve with 5 bar at the inlet and 4 bar at the outlet:

Kv = 10 · √(0.998 / 1) ≈ 9.99 · · · Cv = 1.156 · 9.99 ≈ 11.55

With a 25 % margin, you need a valve with Kvs ≥ 12.5: the smallest standard one is DN 32 with Kvs 16, which would work at 9.99 / 16 ≈ 62 % open.

How to choose the valve: Kv and Kvs

Kvs is the Kv of the valve fully open (given by the manufacturer). To control well, the valve should not work almost closed or without margin: choose a Kvs between 25 % and 60 % higher than the calculated Kv. The calculator suggests the smallest globe valve with Kvs ≥ 1.25 · Kv from this common series:

DN1520253240506580100125150200250300
Kvs0.1 to 46.3101625406310016025036063010001440

The opening shown is that of a valve with a linear characteristic (Kv proportional to the stroke). With an equal-percentage valve, for the same Kv, the plug rises somewhat more. Always check the exact Kvs in the manufacturer's catalog.

This formula is valid for liquids without cavitation. If the pressure drop exceeds half the absolute inlet pressure, the liquid can boil inside the valve (cavitation) and the flow rate stops increasing: check with the manufacturer. For gases and steam other formulas are used (IEC 60534 standard).
Advertisement

Frequently asked questions

What is the Kv of a valve?

It is the flow rate of water, in m³/h, that passes through the valve with a pressure drop of 1 bar. A valve with Kv = 10 lets 10 m³/h of water through when there is a 1 bar difference between inlet and outlet.

How do you convert Cv to Kv?

Kv = 0.865 · Cv and Cv = 1.156 · Kv. Cv is the flow rate in US gallons per minute with a 1 psi pressure drop; Kv, in m³/h with 1 bar.

What is the difference between Kv and Kvs?

Kv is the coefficient your system needs; Kvs is the coefficient of the valve fully open (a manufacturer’s figure). Choose a valve with a Kvs between 25 % and 60 % higher than the calculated Kv, so that it does not work almost closed or without margin.

Does it work for gases and steam?

No: this formula is for liquids. In gases and steam the density changes as the pressure drops, and other formulas are used (IEC 60534 standard).

What happens if the pressure drop is very large?

The liquid can boil inside the valve (cavitation) and the flow rate stops increasing even if you lower the outlet pressure further. If the pressure drop is more than half the absolute inlet pressure, check with the manufacturer.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.