Pump power calculator
Pump power calculator: electrical power from flow rate, pressure and efficiencies, the flow rate for a given power and the energy per m³ pumped.
The power of a pump depends on the flow rate it moves, the pressure it gives the liquid and the efficiencies of the pump and the motor. With this calculator you get the electrical power, or the flow rate you can move with a given power, and the energy each cubic meter costs.
How to use the calculator
- Enter the flow rate and the pressure the pump must deliver (difference between discharge and suction, including head losses).
- Adjust the efficiencies if you know them: they are on the manufacturer's data sheet.
- You get the electrical power. If you type the power, the flow rate is calculated.
Pump power formula
With Q in m³/s and Δp in Pa, the power comes out in watts. Ph is the hydraulic power the liquid receives; the shaft power is Ph / ηb, and the electrical power is the shaft power divided by the motor efficiency.
Worked example
10 m³/h at 3 bar, with 70 % pump efficiency and 90 % motor efficiency:
Pumping cost
The energy per cubic meter is the electrical power divided by the flow rate (kWh/m³). Multiply it by the price of a kWh to know what pumping each cubic meter costs: with 0.132 kWh/m³ and €0.15/kWh it comes to about €0.02/m³.
Pressure and pump head
Manufacturers often give the head in meters of liquid column instead of the pressure. For water, 1 bar is about 10.2 m. For other liquids: H = Δp / (ρ · g).
Frequently asked questions
Does the density of the liquid matter?
Not if you work with pressure: the power is flow rate times pressure. It does matter if you start from the head in meters, because the same head of a denser liquid means more pressure.
What efficiencies are normal?
For centrifugal pumps, from 50 % in small ones to over 80 % in large ones. Modern electric motors are between 80 and 95 % efficient.
