Open channel and partially full pipe calculator (Manning)
Calculate the flow rate of a rectangular or trapezoidal channel or a partially full pipe with the Manning equation. Also the water depth, slope or roughness.
In a channel, a ditch or a sewer the water is not under pressure: it flows by gravity, with a free surface. Its flow rate depends on the shape of the cross-section, the water height (the depth), the slope and the roughness of the walls. The Manning equation links them all and is the one used to size channels, culverts and sewer pipes.
How to use the calculator
- Choose the cross-section: rectangular, trapezoidal or circular (a partially full pipe) and enter its dimensions.
- Choose the material: it sets its Manning coefficient n, which you can change.
- Of flow rate, depth, slope and n coefficient, leave empty the one you want to calculate.
Manning equation
Where Q is the flow rate (m³/s), n the Manning roughness coefficient, A the wetted area (m²), R = A / P the hydraulic radius (m), P the wetted perimeter (m) and S the slope (m/m). The mean velocity is v = Q / A.
| Cross-section | Wetted area A | Wetted perimeter P |
|---|---|---|
| Rectangular | b · y | b + 2 · y |
| Trapezoidal | (b + z · y) · y | b + 2 · y · √(1 + z²) |
| Circular | D² / 8 · (θ − sin θ) | D · θ / 2 |
In the circular section, θ = 2 · arccos(1 − 2 · y / D) is the angle (in radians) covered by the water.
Manning coefficients
| Material | n |
|---|---|
| PVC, PE | 0.009 to 0.011 |
| Steel, cast iron | 0.012 |
| Smooth concrete | 0.013 |
| Brick, masonry | 0.015 |
| Rough or shotcrete concrete | 0.017 |
| Clean earth | 0.022 |
| Earth with grass | 0.030 |
| Natural stony stream bed | 0.035 to 0.050 |
Worked example
Rectangular concrete channel (n = 0.013), 1 m wide, with 0.3 m of water and a 0.5 % slope:
That is 535 L/s at a velocity of 1.78 m/s.
Frequently asked questions
What is the hydraulic radius?
The wetted area divided by the wetted perimeter (R = A / P). In a full pipe it is D / 4. The larger it is, the less friction the water has with the walls.
Why does a pipe carry more flow when almost full than when completely full?
Because when it fills completely the wetted perimeter suddenly grows (it touches the crown) and the hydraulic radius drops. The maximum flow rate of a circular pipe occurs at 94 % fill.
What is the Froude number?
It compares the water velocity with that of a wave on its surface. Below 1 the flow is slow (subcritical); above 1, fast (supercritical), with a risk of hydraulic jumps.
