Pump NPSH available calculator
Calculate the NPSH available at a pump suction to know whether it will cavitate, the maximum suction lift or the suction losses it can take, with water at any temperature.
A pump does not “suck” the liquid: it is the pressure above it (usually atmospheric) that pushes it to the impeller. If the pressure at the pump inlet drops too far, the liquid boils, bubbles form and implode against the impeller and the pump cavitates: it gets noisy, loses flow and wears out. The NPSH available tells you how much margin you have. With this calculator you get it and, the other way round, the maximum height at which you can place the pump or the suction losses it can take.
How to use the calculator
- Choose the liquid. For water, its temperature is enough; for any other, its density and vapour pressure.
- Enter the absolute pressure on the liquid (atmospheric if the tank is open).
- Enter the liquid level relative to the pump centreline (negative if the pump lifts from below) and the pressure drop in the suction line.
- Leave empty the value you want to calculate and enter the NPSH required from the pump curve to see the margin.
NPSH available formula
Where Pd is the absolute pressure on the liquid surface (Pa), Pv the vapour pressure of the liquid at its temperature (Pa), ρ its density (kg/m³), g = 9.80665 m/s², zs the height of the liquid surface above the pump centreline (m, negative if it is below) and hs the pressure drop in the suction line (m).
The NPSH required (NPSHr) is given by the manufacturer on the pump curve and rises with the flow rate. The vapour pressure of water is calculated with the Antoine equation.
Worked example
A pump drawing water at 20 °C from an open well, with the level 3 m below the centreline and 0.5 m of suction losses:
If the pump needs 3 m, the margin is 3.6 m: it does not cavitate. With the water at 80 °C, the first term drops to 5.67 m and the NPSHa to 2.17 m: it would cavitate. For a 0.5 m margin, the water level cannot be more than 1.7 m below the pump centreline.
Vapour pressure of water
| Temperature (°C) | Pv (kPa abs) | Pv in m of water |
|---|---|---|
| 10 | 1.22 | 0.12 |
| 20 | 2.33 | 0.24 |
| 40 | 7.36 | 0.76 |
| 60 | 19.9 | 2.06 |
| 80 | 47.3 | 4.96 |
| 90 | 70.0 | 7.40 |
| 100 | 101.3 | 10.8 |
Frequently asked questions
What is NPSH?
Net Positive Suction Head: how much pressure the liquid has to spare at the pump inlet above its vapour pressure, in metres. If the available NPSH is lower than the pump needs, the liquid boils inside and the pump cavitates.
What is the maximum suction lift of a pump?
In theory, about 10.3 m with cold water at sea level. In practice, after subtracting the vapour pressure, the suction losses and the NPSH required, it rarely exceeds 6 to 7 m.
Why does hot water cavitate more?
Because its vapour pressure rises a lot: at 20 °C it is 0.023 bar and at 80 °C, 0.47 bar. With water above 60 to 70 °C the pump has to be below the tank (flooded suction).
