Skip to content
EN
  • Español
  • English
Advertisement

Resistor color code calculator: 4, 5 and 6 bands

Find the value of a resistor from its color bands (4, 5 or 6) or the colors for a value, with tolerance, min, max and E series. Inductors too.

Enter the data: the results are calculated instantly.

Resistor value—
Inductance—
Tolerance (±)—
Minimum value—
Maximum value—
Minimum inductance—
Maximum inductance—
Temperature coefficient—
Nearest E12—
Nearest E24—
Nearest E96—
Nearest E12—
Nearest E24—
Nearest E96—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/resistor-color-code-calculator/

Advertisement

Through-hole resistors do not have their value printed on them: it is painted in color bands following IEC 60062. With this calculator you read the value of a 4-, 5- or 6-band resistor by choosing its colors, or you do the opposite: enter the value you need and it tells you its colors. It also gives you the tolerance, the minimum and maximum value, the temperature coefficient and whether it is a standard value from the E12, E24 or E96 series. It works for color-coded inductors too.

How to use the calculator

  1. Choose what you want to calculate: “From colors to value” or “From value to colors”.
  2. Choose the component: 4-, 5- or 6-band resistor, or inductor.
  3. From colors to value: choose the color of each band starting from the end opposite the tolerance band. The value appears instantly.
  4. From value to colors: enter the value in the unit you want (Ω, kΩ, MΩ… or µH and mH for inductors) and choose the tolerance. If the value does not fit the digits of the bands, the calculator rounds it and warns you.
  5. If the value is not in any standard series, it suggests the nearest E12, E24 and E96 values. The drawing shows the bands and the chart shows the cells used.

How to read the color code

The first bands are the significant digits (two on 4-band resistors and three on 5- and 6-band ones), the next one is the multiplier (the power of 10 the digits are multiplied by), then the tolerance and, on 6-band resistors, the temperature coefficient.

R = digits × multiplier · · · Rmin = R · (1 − tol) · · · Rmax = R · (1 + tol)
ColorDigitMultiplierToleranceTemp. coefficient
Black0×1—250 ppm/K
Brown1×10±1%100 ppm/K
Red2×100±2%50 ppm/K
Orange3×1 k±0.05%15 ppm/K
Yellow4×10 k±0.02%25 ppm/K
Green5×100 k±0.5%20 ppm/K
Blue6×1 M±0.25%10 ppm/K
Violet7×10 M±0.1%5 ppm/K
Gray8×100 M±0.01%1 ppm/K
White9×1 G——
Gold—×0.1±5%—
Silver—×0.01±10%—
No band——±20%—

These are the colors of IEC 60062, 2016 edition. In older charts gray appears as ±0.05%; the rest is the same.

A trick to remember the order of the digits: black, brown, red, orange, yellow, green, blue, violet, gray and white follow the rainbow from 2 to 7, with black (nothing) and white (everything) at the ends.

Advertisement

4-, 5- and 6-band resistors

  • 4 bands: 2 digits, multiplier and tolerance. They are usually carbon film, beige, and ±5% (gold).
  • 5 bands: 3 digits, multiplier and tolerance. They are usually metal film, blue, and ±1% (brown) or better.
  • 6 bands: like the 5-band ones plus the temperature coefficient, how much the value changes per degree: 50 ppm/K is 0.005% per kelvin.
  • 3 bands: a 4-band resistor without a tolerance band (±20%). Choose “4 bands” and “No band”.

The tolerance band is usually set slightly apart from the others or is wider: that tells you which end to start from. If in doubt, the right reading is the one that gives a standard value.

Standard values: E12, E24 and E96 series

Resistors are not made in just any value, but in the E series of IEC 60063: each decade (from 10 to 100, from 100 to 1000…) is split into 12, 24, 48, 96 or 192 values in geometric progression, so that with their tolerance they cover the whole range.

SeriesUsual toleranceValues per decade
E12±10%10 · 12 · 15 · 18 · 22 · 27 · 33 · 39 · 47 · 56 · 68 · 82
E24±5%those of E12 plus 11 · 13 · 16 · 20 · 24 · 30 · 36 · 43 · 51 · 62 · 75 · 91
E48±2%100 · 105 · 110 · 115 · 121 · 127 · 133 · 140 · 147 · 154…
E96±1%100 · 102 · 105 · 107 · 110 · 113 · 115 · 118 · 121 · 124…

Watch out: not all E24 values are in E96 (E96 has 118 and 121, but not 120). The calculator tells you the shortest series that contains your value and, if it is in none, the nearest ones.

Worked example

A 4-band resistor yellow, violet, red and gold:

R = 47 × 100 = 4700 Ω = 4.7 kΩ ±5% · · · Rmin = 4465 Ω · · · Rmax = 4935 Ω

The other way around: 4.75 kΩ needs 3 digits (475 × 10), so it is a 5-band resistor yellow, violet, green, brown and the tolerance (brown if it is ±1%). It is an E96 value. It does not fit on a 4-band resistor: the calculator rounds it to 4.8 kΩ, warns that it is not standard and suggests 4.7 kΩ (E12 and E24) or 4.75 kΩ (E96).

Inductor color code

Axial inductors (coils) shaped like resistors use the same colors for the digits and the multiplier, but the value is in microhenries (µH). The fourth band is the tolerance: black ±20%, brown ±1%, red ±2%, orange ±3%, yellow ±4%, gold ±5% and silver ±10%. Yellow, violet, black and gold is a 47 µH ±5% inductor.

Always check with a multimeter if the resistor is in an old circuit: heat changes the colors (red can look brown and orange, red). Measure with the power off and with at least one lead desoldered.
Advertisement

Frequently asked questions

Which end do you start reading a resistor from?

From the end with the band closest to the edge. The tolerance band (gold, silver, brown…) is usually set apart from the others, at the other end. If in doubt, the right reading is the one that gives an E-series value (4.7 kΩ and not 7.4 kΩ, for example) and that does not start with gold or silver.

What is the difference between a 4-band and a 5-band resistor?

A 4-band resistor has two significant digits, the multiplier and the tolerance (it is usually carbon film, ±5%). A 5-band one has three digits and is usually metal film, ±1% or better. A 6-band one adds the temperature coefficient in ppm/K.

What is the E12 or E24 series?

They are the standard values that are manufactured (IEC 60063): 12 or 24 values per decade, spread so that with their tolerance they cover the whole range. E12 (10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82) goes with ±10%, E24 with ±5% and E96 with ±1%.

What does a resistor with a single black band mean?

That it is 0 Ω: a jumper fitted by the same machine as the resistors. It has no percentage tolerance.

How do you read the colors of an inductor?

Like a 4-band resistor, but the value comes out in microhenries (µH): yellow, violet, black and gold is 47 µH ±5%. Some military inductors have a wider silver band at the start that only shows it is an inductor.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.