Skip to content
EN
  • Español
  • English
Advertisement

Series and parallel resistor calculator (and capacitors)

Calculate the equivalent resistance of up to 7 resistors in series or parallel, or the capacitance of capacitors. Also the value missing for a total.

Fill in 1 of the 2 fields and the missing one is calculated. You can type in any of them.

Up to six values. Empty fields do not count.
If you enter the total you want, this shows the component you have to add to get it.
Components that count—
Total if connected the other way—
Total if connected the other way—

Use this calculator for reference only, as we cannot guarantee that the results are free of errors.

Disclaimer

https://dyaii.es/en/series-parallel-resistor-calculator/

Advertisement

When you do not have the exact resistor you need, you can get it by combining several: in series, one after another, or in parallel, all between the same two points. This calculator gives the equivalent resistance of up to seven resistors, or the equivalent capacitance if they are capacitors, and also the other way around: what value you have to add to the ones you already have to reach a total.

How to use the calculator

  1. Choose whether they are resistors or capacitors, and whether they are in series or in parallel.
  2. Enter the values of the components, each in its own unit (Ω, kΩ, MΩ; pF, nF, µF). Empty fields do not count: you can use just two.
  3. The missing component (or one more) works in two ways. If you type in it, it counts as one more and the total is calculated. If you enter the equivalent total you want, it shows the value you have to add to get it.
  4. The drawing shows how they are connected and how the current flows: in parallel, each branch moves faster the more current it carries.

Resistors in series

One after another, the same current flows through all of them. The equivalent resistance is the sum:

Req = R₁ + R₂ + R₃ + …

It is always larger than the largest of them. The voltage is shared in proportion to each resistance: that is the principle of the voltage divider.

Advertisement

Resistors in parallel

All between the same two points, they all have the same voltage and the current is shared. You add the reciprocals (the conductances):

1 / Req = 1 / R₁ + 1 / R₂ + 1 / R₃ + …

With two resistors you get the “product over sum” formula, and with n equal resistors, the value of one divided by n:

Req = R₁ · R₂ / (R₁ + R₂) · · · Req = R / n

The equivalent is always smaller than the smallest of them. The largest current flows through the smallest resistor.

Capacitors in series and in parallel

Capacitors combine the opposite way to resistors:

ConnectionResistorsCapacitors
In seriesReq = R₁ + R₂ + …1 / Ceq = 1 / C₁ + 1 / C₂ + …
In parallel1 / Req = 1 / R₁ + 1 / R₂ + …Ceq = C₁ + C₂ + …

In parallel the capacitances add up and all of them withstand only the voltage of the lowest-rated one. In series the capacitance drops, but the voltage is shared: two equal capacitors in series give half the capacitance and withstand twice the voltage (it is a good idea to put a balancing resistor in parallel with each one).

The missing component

To reach a total with the ones you already have:

In series: Rx = Req − (R₁ + R₂ + …) · · · In parallel: 1 / Rx = 1 / Req − (1 / R₁ + 1 / R₂ + …)

In series the total has to be greater than the sum of the ones you have; in parallel, smaller than their equivalent. Otherwise no resistor can do it and the calculator warns you. With capacitors it is the other way around.

Worked example

Three resistors of 100 Ω, 220 Ω and 470 Ω:

In series: Req = 100 + 220 + 470 = 790 Ω
In parallel: 1 / Req = 1/100 + 1/220 + 1/470 = 0.016673 → Req = 59.98 Ω

If you have 100 Ω and 220 Ω and want 1000 Ω in series, you are missing 1000 − 320 = 680 Ω (a value from the E12 series). If you want 50 Ω in parallel: 1 / Rx = 1/50 − 1/100 − 1/220 = 0.005455 → Rx = 183.3 Ω; the closest E24 value is 180 Ω, which gives 49.7 Ω.

With capacitors of 10 µF, 22 µF and 47 µF: in parallel, 79 µF; in series, 1 / (1/10 + 1/22 + 1/47) = 6.00 µF.

Standard values (E12 series)

Resistors and capacitors are made in series of values. The E12 series (10% tolerance) has these values in each decade, multiplied by 1, 10, 100, 1000…:

1.0 · 1.2 · 1.5 · 1.8 · 2.2 · 2.7 · 3.3 · 3.9 · 4.7 · 5.6 · 6.8 · 8.2

The E24 series (5%) adds one value between each two: 1.1 · 1.3 · 1.6 · 2.0 · 2.4 · 3.0 · 3.6 · 4.3 · 5.1 · 6.2 · 7.5 · 9.1. They are the values of IEC 60063. When the missing value does not exist, combine two standard ones with this same calculator.

Advertisement

Frequently asked questions

How do you add resistors in parallel?

You add their reciprocals: 1/Req = 1/R₁ + 1/R₂ + … With two resistors this becomes Req = R₁ · R₂ / (R₁ + R₂). The equivalent is always smaller than the smallest of them: 100 Ω and 220 Ω in parallel give 68.75 Ω.

What about capacitors?

The opposite of resistors: in parallel their capacitances add up (C = C₁ + C₂ + …) and in series their reciprocals add up (1/C = 1/C₁ + 1/C₂ + …). Two equal capacitors in series give half the capacitance, but withstand twice the voltage.

How do I find the resistor I need for a given value?

Enter the ones you have and, in “Equivalent total”, the value you want: “Missing component” shows the one you have to add. In series it is the difference; in parallel, 1/Rx = 1/Req − (1/R₁ + 1/R₂ + …). Then pick the closest one from the E12 or E24 series.

What happens to the current and the voltage?

In series, the current is the same through all of them and the voltage is shared in proportion to each resistance. In parallel, they all have the same voltage and the current is shared: more current flows through the smallest resistance.

Do empty fields count as zero?

No: fields you leave empty do not count, so you can use just two. A 0 Ω resistor would be a short circuit, which is why the calculator does not accept it.

Related calculators

Share

WhatsApp X LinkedIn Telegram Email
Advertisement

Install Diseño y automatización de instalaciones industriales on your phone

All the calculators one tap away, full screen, like an app. It takes no space and is always up to date.